BT Diverse 2000 User Manual page 33

At the base station:
• Press and hold down the
paging button until you hear the
beeps (after about 10 seconds).
You now have up to 1 minute to register
the handset, during which the beeps
#
will continue.
At the handset:
2-4
• Press and hold down the
(or or
3
new base station.
• At the same time, hold down the
button until the display shows
• Enter the system code
(standard setting 0000.)
• Press the
after a few seconds, and the display
shows all available handset numbers.
• Enter the single digit handset number
– from
Handset. It is now registered.
If six handsets are already registered
with the base, three dashes will
appear in the display after you enter
the system code.
#
PWR
), to allocate a number to the
4
#
button. The beeps stop
to – for the Additional
2 6
2-6
2
GREY
button
PWR
:
31