BT Diverse 2000 User Manual page 25

Please note:
a base station for a long time, while the
handset is switched on, it may take
more than 20 minutes to 'find' the base
station again when you come back
within range. However, by simply
switching the handset OFF for a
moment, then ON again, it will find
the base station within a few seconds.
Using the memory to store and
dial numbers
Your Diverse 2000 Additional Handset
can store 10 phone numbers, each up to
22 digits long, which can then be speed
dialled. Stored numbers can include
settings made with the
buttons (ie, to store special service or
Select Services numbers that use
symbols for access).
To store a number
The handset must be switched ON.
STO MEM
• Press the
• Press the
• Press a digit from
the memory location under which the
number is stored. Display shows the
memory location you have chosen.
• Enter the number you want stored.
Display shows the number.
• Press the
number.
Storing a new number in memory
automatically overwrites any previous
number stored in that location.
If you go out of range of
0-9
button.
STO
button.
MEM
0-9
button to confirm the
STO
, and
RCL
. This selects
#
23