Enable Logging; Enable Audit Logging; Enable E-Mail Alerting For Isd/Idp Events - D-Link DFL-1100 Manual

Hide thumbs Also See for DFL-1100:

Table of Contents

configurable. It's also possible to have E-mail alerting for IDS/IDP events to up to three email

addresses.

Enable Logging

Follow these steps to enable logging.

Step 1. Enable syslog by checking the Syslog box.

Step 2. Fill in your first syslog server as Syslog server 1, if you have two syslog servers

you have to fill in the second one as Syslog server 2. You must fill in at least one syslog

server for logging to work.

Step 3. Specify what facility to use by selecting the appropriate syslog facility. Local0 is

the default facility.

Click the Apply button below to apply the setting or click Cancel to discard changes.

To start auditing all traffic trough the firewall, follow the sets below and the firewall will start

logging all traffic trough the firewall, this is needed for running third party log analyzers on the

logs and to see how much traffic different connections use.

Follow these steps to enable auditing.

Step 1. Enable syslog by checking the Enable audit logging box.

Click the Apply button below to apply the setting or click Cancel to discard changes.

Follow these steps to enable E-mail alerting.

Step 1. Enable E-mail alerting by checking the Enable E-mail alerting for IDS/IDP

events checkbox.

Step 2. Choose the sensitivity level.

Step 3. In the SMPT Server field, fill in the SMTP server to which the DFL-1100 should

send email.

Step 4. Specify up to three valid email addresses to receive the email alerts.

Click the Apply button below to apply the setting or click Cancel to discard changes.

Table of Contents