Assigning A Static Ip Address In Windows Xp - D-Link AirPlus DWL-G730AP Manual

Networking Basics (continued)
Assigning a Static IP Address
in Windows XP/2000
 Click on Internet Protocol
(TCP/IP).
 Click Properties.
Select Use the following
IP address in the Internet
Protocol (TCP/IP) Properties
window (shown below)

In the window below, select Use the following IP address. Input your IP

address and subnet mask. (The IP addresses on your network must be
within the same range. For example, if one computer has an IP address
of 192.168.0.2, the other computers should have IP addresses that are
sequential, like 192.168.0.3 and 192.168.0.4. The subnet mask must be
the same for all the computers on the network.)
IP Address:
e.g., 192.168.0.2
Subnet Mask:
255.255.255.0
Default Gateway:
Enter the LAN IP address of
the wireless router. (D-Link
wireless routers have a LAN
IP address of 192.168.0.1)
Select Use the following

DNS server address. Enter
the LAN IP address of the
wireless router. (D-Link
wireless routers have a LAN
IP address of 192.168.0.1)
 Click OK.
You have completed the assignment of a static IP address. (You do not need to assign
a static IP address if you have a DHCP-capable router.)
71 71