D-Link AirPlus DWL-G730AP Manual page 13

Using the Configuration Utility in
Hexadecimal
digits consist of
the numbers 0-9
and the letters A-F
ASCII (American
Standard Code
for Information
Interchange) is a
code for
representing
English letters as
numbers from 0-
127
SSID:
(Service Set Identifier) default
name that identifies a network. All devices on a network must share the same SSID
name in order to communicate on the network. If you choose to change the SSID from
the default setting, input your new SSID name in this field.
Channel:
Channel
the default setting. All devices on the network must be set to the same channel to
communicate on the network.
Authentication:
Select Open System to communicate the key across the network.
Select Shared Key to limit communication only to those devices
that share the same WEP settings.
Select WPA to select Wi-Fi Protected Access in conjunction with a
RADIUS server in your network
Select WPA-PSK to select Wi-Fi Protected Access without a RADIUS
server.
WEP:
Select Enabled or Disabled.
WEP Encryption:
Key Type:
Select Hexadecimal or ASCII key type
Keys 1-4:
Input up to four encryption keys. You will select one of these to be the
active key.
Apply:
Click Apply to apply the changes.
Home > Wireless
6 is the default channel. Input a new number if you want to change
Select 64-bit or 128-bit WEP encryption.
AP Mode
is the default setting. The SSID is a unique
13 13
(continued)