Ap Client Mode - D-Link AirPlus DWL-G730AP Manual

Using the Configuration Utility in
SSID-
Service Set Iden-
tifier (SSID) is the
name designated for
a specific wireless
local area network
(WLAN). The SSID's
factory default set-
ting is default. The
SSID can be easily
changed to connect
to an existing wire-
less network or to
establish a new wire-
less network.
Channel-
6 is the default
channel. All devices
on the network must
share the same
channel. (Note: The wireless adapters will automatically scan and match the wireless
setting.)
Wireless Mode-
Authentication-
WEP-
WEP Encryption-
Key Type-
Keys 1-4-
Home > Wireless
Select Infrastructure or Ad-Hoc mode.
Select Open System to communicate the key across the
network.
Select Shared Key to limit communication only to those devices
that share the same WEP settings.
Select WPA-PSK to select Wi-Fi Protected Access without a
RADIUS server.
Wired Equivalent Privacy (WEP) is a wireless security protocol
for Wireless Local Area Networks (WLAN). WEP provides se-
curity by encrypting the data that is sent over the WLAN. Select
Enabled or Disabled. Disabled is the default setting.
Select the level of encryption desired: 64-bit, or 128-bit
Select HEX or ASCII
Input up to 4 WEP keys; select the one you wish to use

AP Client Mode

25 25
(continued)