Using the Configuration Utility in
Advanced > Filters > MAC Filters
Disable MAC
Filters:
Allow:
Deny:
Name:
Clear:
MAC Address:
Clone:
Apply:
Click to Disable MAC Filters.
Allow only those devices with the listed MAC addresses
access to the network.
Deny the devices that are listed from accessing the network.
Enter a name for the device.
Click Clear to erase the name.
Enter the MAC address manually.
Select the DHCP Client from the pull-down list and click
Clone to enter the MAC address into the list.
Click Apply to save the changes.
Router Mode
47
47
(continued)