D-Link AirPlus DWL-G730AP Manual page 14

Using the Configuration Utility in
SSID:
(Service Set
Identifier) Default
the default setting. The
SSID is a unique name
that identifies a network.
All devices on a network
must share the same
SSID name in order to
communicate on the
network. If you choose to
change the SSID from the
default setting, input your
new SSID name in this
field.
Channel:
Channel
the default channel. Input a
new number if you want to
change the default setting.
All devices on the network must be set to the same channel to communicate on the
network.
Authentication:
Select WPA to select Wi-Fi Protected Access in conjunction with a
RADIUS server in your network.
When WPA is selected fill in the following fields:
RADIUS Server 1 IP:
Port:
Enter the Port number here.
Shared Secret:
RADIUS Server 2 IP:
Port:
Enter the Port number here.
Shared Secret:
Apply:
Click Apply to apply the changes.
Home > Wireless > WPA
is
6
is
Enter the IP address of the RADIUS server.
Enter the shared secret here.
Enter the IP address of the RADIUS server.
Enter the shared secret here.
14 14
AP Mode (continued)