Assigning A Static Ip Address - D-Link DIR-400 User Manual

Appendix B - Networking Basics

Assigning a static IP address

If you are not using a DHCP capable gateway/router, or if you need to assign a static IP address, please follow the
steps below:
Step 1
Windows XP - Click on Start > Control Panel > Network Connections.
®
Windows 000 - From the desktop, right-click My Network Places > Properties.
®
Step 2
Right-click on the Local Area Connection which represents your D-Link network adapter and select Properties.
Step 3
Highlight Internet Protocol (TCP/IP) and click Properties.
Step 4
Click Use the following IP address and enter an IP address that is on the same subnet as your network or the LAN
IP address on your router.
Example: If the router´s LAN IP address is 19.168.0.1, make your IP address
19.168.0.X where X is a number between  and 99. Make sure that the number you
choose is not in use on the network. Set Default ��ateway the same as the LAN IP
address of your router (19.168.0.1).
Set Primary DNS the same as the LAN IP address of your router (19.168.0.1). The
Secondary DNS is not needed, though you may enter a DNS server from your ISP.
Step 5
Click OK twice to save your settings.
D-Link DIR-400 User Manual 103