D-Link AirPlus DWL-G730AP Manual page 38

Using the Configuration Utility in
Dynamic IP Address
is selected here.
Other options include:
Static IP Address
(if your ISP provides
you with a static IP
a d d r e s s ) , P P P o E
(for most DSL users),
PPTP (for Europe)
and BigPond Cable
(for Australia).
Dynamic
IP Address-
Host Name-
MAC Address-
Clone
MAC Address-
Primary/
Secondary DNS
Address-
MTU-
Home > WAN > Dynamic IP Address
Choose Dynamic IP Address to obtain an IP address
automatically.
The Host Name is optional but may be required by some ISPs.
The default host name is the device name of the router and
may be changed.
The default MAC address is set to the WAN's physical
interface MAC address on the router. It is not recommended
that you change the default MAC address unless required by
your ISP.
The default MAC address is set to the WAN's physical interface
MAC address on the router. You can use the "Clone MAC
Address" button to copy the MAC address of the Ethernet Card
installed by your ISP and replace the WAN MAC address with
the MAC address of the router. It is not recommended that
you change the default MAC address unless required by your
ISP.
Enter a DNS address if you do not wish to use the one provided
by your ISP.
Maximum Transmission Unit-1500 is the default setting
Enter an MTU value only if required by your ISP. Otherwise,
leave it at the default setting.
38 38
Router Mode (continued)