Using The Configuration Utility In Router Mode - D-Link AirPlus DWL-G730AP Manual

Using the Configuration Utility
in Router Mode
To configure the DWL-G730AP in Router mode, you must be connected to the router
via a wireless network adapter. The LAN Port on the unit functions as a WAN port when
the DWL-G730AP is operating in Router mode. To run the setup wizard, establish a
wireless connection with the DWL-G730AP and follow the steps below.
To use the DWL-G730AP as a router, toggle the switch on the back of the unit.
Open the Web browser

Type in the IP address of the router

(http://192.168.0.30)
Note: if you have changed the default IP address assigned to
the DWL-G730AP, make sure to enter the correct IP address.
Type admin in the User Name field

Leave the Password blank

Click OK

The Home>Wizard
screen will appear.
Please refer to the
Quick Installation Guide
for more information
regarding the Setup
Wizard.
Home > Wizard
35 35