Table of Contents
Advertisement
Quick Links
Quick Reference
Loading paper
Loading trays
CAUTION—TIPPING HAZARD: To reduce the risk of
equipment instability, load each tray separately. Keep all
other trays closed until needed.
1
Remove the tray.
Note: To avoid paper jams, do not remove trays while the
printer is busy.
2
Adjust the guides to match the size of the paper that you are
loading.
3
Flex, fan, and align the paper edges before loading.
4
Load the paper stack with the printable side facedown.
Notes:
•
To avoid paper jams, make sure that the stack height is
below the maximum paper fill indicator.
•
Do not slide paper into the tray. Load paper as shown in
the illustration.
1
5
Insert the tray.
If necessary, set the paper size and paper type from the control
panel to match the paper loaded.
Loading the multipurpose feeder
1
Open the multipurpose feeder.
2
Adjust the guide to match the size of the paper that you are
loading.
Advertisement
Table of Contents
Related Manuals for Konica Minolta Bizhub 3602
Summary of Contents for Konica Minolta Bizhub 3602
- Page 1 Adjust the guides to match the size of the paper that you are Insert the tray. Quick Reference loading. If necessary, set the paper size and paper type from the control panel to match the paper loaded. Loading the multipurpose feeder Loading paper Open the multipurpose feeder.
-
Page 2: Printing From A Computer
Flex, fan, and align the paper edges before loading. Remove the used toner cartridge. Printing Printing from a computer Note: For labels, card stock, and envelopes, set the paper size and paper type in the printer before printing the document. Load the paper. -
Page 3: Replacing The Imaging Unit
Remove the toner cartridge. Unpack the new imaging unit, and then shake it three times to redistribute the toner. Close the front door. Warning—Potential Damage: Do not expose the imaging Remove the used imaging unit. unit to direct light for more than 10 minutes. Extended Note: Dispose of the empty toner cartridge according to your exposure to light may cause print quality problems. -
Page 4: Clearing Jams
• Do not slide paper into the tray. Load paper as shown in the Clearing jams illustration. Avoiding jams Load paper properly • Make sure that the paper lies flat in the tray. Correct loading of paper Incorrect loading of paper Insert the toner cartridge. -
Page 5: Identifying Jam Locations
Identifying jam locations Paper jam in the front door Remove the toner cartridge. Remove the tray. Notes: • When Jam Assist is set to On, the printer automatically flushes blank pages or partially printed pages after a jammed page has been cleared. Check your printed output for blank pages. -
Page 6: Paper Jam In The Rear Door
Remove the jammed paper. Note: Make sure that all paper fragments are removed. Insert the toner cartridge. Note: Use the arrows inside the printer as guides. Insert the imaging unit. Note: Use the arrows inside the printer as guides. Close the front door. Insert the tray. -
Page 7: Paper Jam In The Standard Bin
CAUTION—HOT SURFACE: The inside of the printer Paper jam in the standard bin might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching Remove the jammed paper. Note: Make sure that all paper fragments are removed. Paper jam in the duplex unit Remove the jammed paper. -
Page 8: Paper Jam In Trays
Paper jam in trays Remove the tray. Flex, fan, and align the paper edges before loading. Reload paper, and then adjust the paper guide. Remove the jammed paper. Note: Make sure that all paper fragments are removed. Insert the tray. Paper jam in the multipurpose feeder Remove paper from the multipurpose feeder.