Checking The Firmware Version Number; Security Authentication Firmware Version Number; Accessing The Service Mode; Access Method To The Service Mode - Konica Minolta bizhub 423 Stringing Machine

5. Checking the firmware version number

5. Checking the firmware version number
• Confirm the need to enhance or not to enhance the security function with the administra-
tor of this machine: If administrator wants to enhance, check the firmware version num-
ber and the checksum value.
• If the firmware version number of this machine is different from numbers shown in the list
below, it will be necessary to re-write to the firmware version corresponding to security.
Refer to P.35 for the method of how to re-write the firmware.
5.1

Security authentication firmware version number

bizhub 423/363/283/223/7828
Refer to P.16 for the method of checking the firmware version.
6.

Accessing the Service Mode

6.1

Access method to the Service Mode

1. Press the Utility/Counter key.
2. Touch [Meter Count].
3. Touch [Check Details] on Meter Count display.
4. Press the following keys in this order:
Stop00 Stop 0 1
5. Enter the CE Password.
NOTE
• Authentication using the CE Password is carried out only if "ON" is set for
[CE Authentication] as accessed through [Service Mode]  [Enhanced Security].
NOTE
• The CE password entered is displayed as "✱."
• NEVER forget the CE password. When forgetting the CE password, call responsi-
ble person of KMBT.
4
Security Function Ver. 1.02 Jun. 2011
MFP Controller Ver.
A1UD0Y0-0100-GM0-04
Check Sum
3323
A1UDS1E021DB