Radius-Server Retransmit - D-Link xStack DXS-3250 Cli Manual

Radius Commands

radius-server retransmit

The radius-server retransmit Global Configuration mode command specifies the number of times the software
searches the list of RADIUS server hosts. To reset the default configuration, use the no form of this command.
Syntax
radius-server retransmit retries
no radius-server retransmit
Parameters
•
retries — Specifies the retransmit value. (Range: 1 - 10)
Default Configuration
The software searches the list of RADIUS server hosts 3 times.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example configures the number of times the software searches the list of RADIUS server hosts to 5
times.
console(config)# radius-server retransmit 5
Page 249