Table of Contents
Advertisement
SBI-6129P-C3N SuperBlade Module User's Manual
Menu Option
Boot Mode Select
Boot Priority
Options 1 ~ 17
Delete Boot Option This sub-menu allows you to remove an EFI boot option form the boot order.
Add New Driver
Option
Add driver option
Path for driver
option
Create
Delete Driver
Option
UEFI Hard Disk
Drive BBS Priorities
Hard Disk Drive
BBS Priorities
Network Device
BBS Priorities
Table 5-17. Boot Setup Menu Options
Description
This setting allows you to select the boot mode to use. Options include Legacy,
UEFI or Dual.
This feature allows you to specify the sequence of priority for the boot device
(such as hard disk drives, USB devices, CD-ROM drives, Network drives and so
on). The menu options are for 1st Boot Device, 2nd Boot Device and 3rd Boot
device. Each numbered boot device can be set to a specific device installed in
your system or to Disabled.
NOTE: A device enclosed in parenthesis has been disabled in the corresponding
type menu.
Use this submenu to add a new EFI driver option to the driver order.
Selecting this option brings up a field for entering a name for a new driver option.
Selecting this option brings up a field for entering a path to the driver option in
the format fsx:\path\filename.efi.
After specifying the driver option name and path select this option to create it.
This sub-menu allows you to remove an EFI driver option form the boot order.
Use this submenu to specify the Boot Device Priority sequence from the
available UEFI Hard Disk Drives in the system.
Use this submenu to specify the Boot Device Priority sequence from the
available Hard Disk Drives in the system.
This sub-menu allows you to set the order of the legacy devices in this group for
setting the boot order.
5-24
Advertisement
Table of Contents
