DI /
1 TOOL CONTROL UNIT
DI-1B / DI-2B / DI-9B
CONTROL UNIT
INSTALLATION
STANDS
Connectable tools: T210, T245, PA120, HT420, AP130, DR560 and DS360.
Connectable modules: MS, MV and KN.
HEAT MANAGENEMENT
JBC stations intelligently manage the tool tip temperature:
Work mode: Lift tool from the stand and the
tool tip heats up to the selected temperature.
Sleep mode: When the tool is in the stand, the
temperature reduces (preset sleep temperature
is 180ºC / 360ºF).
Hibernation mode: After longer periods of
inactivity (pre-set to 30 minutes), the power
is cut off and the tool cools down to room
temperature.
Heat management increase tip life which reduces cost of ownership.
2
POWER CORD
Power Cord Socket
USB Connector
MANUAL
w w w.jbctools.com
1 TOOL CONTROL UNIT
DESOLDERING PUMP
to PC
DI