Network Configuration Examples - D-Link DES-815 User Manual

10/100 Fast Ethernet Switch User's Guide
Fast Ethernet Switch and any device that supports full-duplex
operation.
Set the duplex mode through the duplex mode switch at the rear
of the device. To set a port to full-duplex operation, slide the
corresponding duplex switch up. To set for half-duplex, set the
duplex switch down. To set port 1, port 2, or the MII connector to
auto duplex mode detect, set the corresponding switch down.
Figure 7 Setting the Duplex Mode

Network Configuration Examples

This section provides sample configurations showing ways you
might use the 10/100 Fast Ethernet Switch.
Installation
21