Network Configuration - D-Link DKVM-IP8 User Manual

Network Configuration
1. KVM IP factory default settings
Default username: super
Default password: pass
DHCP: Disabled
IP address: 192.168.0.70
Mask: 255.255.255.0
The network configuration software (psetup) is used to set the
network configuration (IP address, mask, DHCP, etc.). When
you want to change the network configuration or cannot
connect IP-KVM because you do not know the IP-KVM network
configuration, in this case, you can view or change the settings
through this "Psetup" software