Table of Contents
Advertisement
This chapter describes the installation procedure for the 10/100
Fast Ethernet Switch. The chapter includes information on
installation locations, connecting power, connecting network
cables, setting the port duplex mode, and has some network
configuration examples.
Installation Site
You have the option to install the product on a table or mount it in
a standard network rack. When installing, choose a sturdy, level
surface in a ventilated area that is dust free and away from heat
vents, warm air exhaust from other devices and direct sunlight.
Avoid proximity to large electric motors or other electromagnetic
equipment.
Observe the following guidelines when choosing a location for the
10/100 Fast Ethernet Switch:
The surface must support at least 3.0 kg (6.5 lbs).
Air temperature should range from 32 to 122 F (0 to 50 C).
Humidity should be less than 90%, non-condensing.
Installation
10/100 Fast Ethernet Switch User's Guide
3
I
NSTALLATION
2 2
15
Advertisement
Table of Contents
