Viewing Your Camera - D-Link SECURICAM Network DCS-900 Manual

DCS-900 Configuration
(continued)
Installing the DCS-900 Behind a Router

Viewing Your Camera

After all settings have been entered correctly, a user inside or outside your
network will have access to the camera through a standard Web browser. To
access from the Internet, simply type in the IP Address of the router given to
you by your ISP, a colon, and the port number that you gave your camera.
(Ex. http://205.163.122.96:83). To access from a computer on your local
(home) network, simply enter the local IP Address of your camera (i.e.
192.168.0.35). If using a port other than port 80, you must enter the IP
address followed by a colon and the assigned port number.
Viewing Your camera
28