System Requirements; Hardware Installation - D-Link DCS-900W Quick Installation Manual

System Requirements

•
Java Enabled and Compliant Web Browser
•
CPU: Pentium III, 850MHz or above
•
Memory Size: 128MB
•
VGA card resolution: 800x600 or above
•
Existing 10/100 Mbps Ethernet-Based Network or 802.11b Wireless Network
(802.11b Compliant Access Point or 802.11b Compliant Router)

Hardware Installation

Attach the Antenna
Locate the antenna included with your DCS-900W
and attach it to the antenna connector located on
the back of the DCS-900W.
Attach the Swivel Stand
Locate the stand mount on the bottom panel of the
DCS-900W and screw on the swivel stand to the base
of the DCS-900W.
Connect the Ethernet Cable
Connect the included Ethernet cable to the network
cable connector located on the back panel of the
DCS-900W and attach it to the network. Network
Connectivity is confirmed when the orange LED
Indicator on the DCS-900W located below the Power
LED is illuminated.
Attach the External Power Supply
Attach the external power supply to the DC power
input connector located on the rear panel of the DCS-
900W and connect it to your local power supply.
Note: Power source is confirmed when the green
LED Power Indicator located to the right of the lens
on the DCS-900W is illuminated.
2