Table of Contents
Advertisement
Running the Setup Wizard
Enter an IP Address and Subnet
Mask for your camera. Enter your
Gateway and DNS settings. These
settings must correspond with your
network settings for you to access
the camera. If you are unsure of what
these settings should be, check with
your network administrator.
Click
Next
The Connection Mode depends on
how your camera is connected to
your network. Click Infrastructure for
use with a router or Adhoc for a peer-
to-peer connection. The Network
Name, Wireless Channel, and
Encryption Keys MUST correspond
with your wireless network settings
for the camera to work.
Click
Next
6
(continued)
Advertisement
Table of Contents
