Viewing the Streaming Video
The Home screen of your camera can be accessed from the Setup Wizard using the Link
button. You can also use your favorite Web browser, type "http://address" in the address
box where address is the IP address that you assigned to the DCS-900W from the previous
section. Press Enter.
to view your
If you are installing several cameras, it is recommended to use one computer to
configure all of them before you install them in your planned locations. To avoid IP
address conflict, use 192.168.0.20 for the LAST camera that you plan on installing.
Make sure that you have the latest version of Java installed on your computer to
ensure proper operation when viewing the video in Java mode. Java can be
downloaded for free from Sun's web site. (http://www.java.com)
The Xplug Control is included with the DCS-900W and should be installed on your
computer if you want to use Active X to view your video images instead of Java.
The Xplug Control must be installed on your computer if you are using the remote
monitoring software. Please refer to the Manual included on this CD-ROM for detailed
information on installing the Xplug Control to your computer for use with the software.
Please refer to the Manual located on the CD-ROM for additional information
regarding all features and instructions related to the DCS-900W.