JVC KW-AVX810J Service Manual page 31

NOW ...
INITIALIZE ALL
RUNNING MODE
See "Running mode" for details.
DVD NTSC/PAL
NTSC
PAL
DVD CHECK MODE
See "DVD CHECK MODE" for details.
ERROR READ
DVD ERROR READ
CH ERROR READ
MECHA ERROR READ
READ ALL
DVD ERROR READ
Reading of a DVD unit error history
CH ERROR READ
Reading of a CD changer error history
MECHA ERROR READ
Reading of a door mechanism error history
READ ALL
Reading of a main micon EEPROM (All contents)
ERROR CLEAR
DVD ERROR CLEAR
CH ERROR CLEAR
MECHA ERROR CLEAR
BT VERSION
SW BT CORE ***
HW BT MODULE ***
SW BT MODULE ***
SW HIDEAWAY ***
ADR- ***********
INITIALIZE ALL
OK**
DVD picture change
DVD unit output picture setting (NTSC)
DVD unit output picture setting (PAL)
Clear of each error history
A screen returns to following
indication after clear completion.
Bluetooth version indication
Software version of BT core
Hardware version of BT Module
Software version of BT Module
Software version of BT Hideaway controller
BT Address
INITIALIZE ALL(Each EEPROM is initialized
by a factory shipment state)
Main micon EEPROM initialization
(user entry domain, error history, speaker setting,
subarea of J-version,data to pre-set )
Panel micon EEPROM initialization
(picture adjustment data)
DVD unit EEPROM initialization
(except a permanent domain)
Bluetooth (Module/Hideaway) EEPROM initialization
After clear completion, a screen returns to
normal indication after OK indication was
displayed for three seconds.
(No.MA403<Rev.001>)1-31