JVC KW-AVX810J Service Manual page 25

3.3.9 Removing the Loading motor (See Fig.15 to 18)
(1) Remove the A wheel gear. (See Fig.15)
(2) Remove the A worm gear, M connect gear and M wheel
gear by sequentially. (See Fig.16)
(3) Remove the two screws G attaching the Loading motor.
(Se Fig.17)
(4) When attaching the Loading motor, motor wire should arrange
to figure. (See Fig.18)
A Wheel gear
Fig.15
A worm gear
M connect gear
M wheel gear
Fig.16
G
Fig.17
Wire arrangement
Fig.18
(No.MA403<Rev.001>)1-25