JVC KW-AVX810J Service Manual page 20

3.2.2 Removing the Connection board (See Fig.4)
(1) Remove the five screws C attaching the Connection board.
3.2.3 Removing the Panel board (See Fig.5)
(1) Disconnect the connector wire from LCD module connect-
ed to connector CN403
(2) Disconnect the card wire from LCD module connected to
connector CN401 of the Panel board.
(3) Disconnect the card wire from Switch board connected to
connector CN501 and
(4) Remove the four screws D attaching the Panel board.
3.2.4 Removing the LCD module (See Fig.6)
(1) Disengage six hooks a engaged Panel bracket.
1-20 (No.MA403<Rev.001>)
of the Panel board.
CN502 of the Panel board.
C
C
Fig.4
D
D
CN401
Fig.5
a
hook
a
hook
Fig.6
CN403
D
CN501
D
CN502