JVC KW-AVX810J Service Manual page 17

3.1.5 Removing the Main board (See Fig.14)
(1) Disconnect the connector wire from Mecha switch board
connected to connector
(2) Remove the four screws L attaching the Main board.
3.1.6 Removing the Sub board (See Fig.15, 16)
(1) Remove the five screws M attaching the Sub board. (See
Fig.15)
(2) Disconnect the card wire from DVD mechanism connected
to connector CN602 of the Sub board. (See Fig.16)
CN961 of the Main board.
CN961
L
L
Fig.14
M
M
Fig.15
CN602
Fig.16
(No.MA403<Rev.001>)1-17