JVC KW-AVX810J Service Manual page 16

3.1.4 Removing the Top chassis (See Fig.10 to 13)
(1) Remove the two screws J attaching the Front board. (See
Fig.10)
(2) Disconnect the card wire from Main board connected to
connector CN605 of the Sub board. (See Fig.11)
(3) Disconnect the connector wire from Main board connected
to connector CN607 of the Sub board. (See Fig.11)
(4) Remove the four screws K attaching the both side of Top
chassis. (See Fig.12, 13)
J
CN605
1-16 (No.MA403<Rev.001>)
Fig.10
CN607
Fig.11
K
Fig.12
K
Fig.13