Assembly - Gardena PowerMax Li-40/32 Operator's Manual

2. ASSEMBLY

Before you do assembly:
To connect the lower handle:
2
3
To connect the
upper handle:
4
52
6
5
1
2
To fix the cable to
the handle:
7
8
To assemble the grass box:
q
0
9
18
WARNING! Risk of physical injury!
Cut injury when the blade turns or the product starts
accidentally.
v Wait for the blade to stop, remove the safety key and use
gloves before you do assembly.
1. Put the lower handle
1 Make sure that the handles are fully in place and the handle hole
is inline with the threaded hole.
2
2. Put the washer
3. Put the wing screw
3
4. Tighten the wing screw
1. Put the upper handle
Make sure that the handles are fully in place and the handle holes
are inline.
2. Push the screw
3. Put the washer
4. Tighten the wing nut
1. Fix the cable
2. Check that the cable
the upper handle.
1. Turn the cover
Make sure that the cover
2. Push the cover
Make sure that all connections are connected.
3. Push the handle
1
in the product.
2
on the wing screw
3
in the threaded hole in the product.
3
.
4
on the lower handle
5
through the hole.
2 6
and the wing nut
6
.
7
to the handle with the clip
7
is not trapped between the lower and
0
on the grass box.
0
aligns to the grass box.
0
on the grass box until the connections click.
q 0
into the cover
3
.
1
.
5
on the screw .
8
.
until it clicks.