Assembly; Before You Do Assembly; To Connect The Lower Handle; To Connect The Upper Handle - Gardena POWERMAX 1200/32 Operating Instructions Manual

Clear any obstruction and wait for a few minutes for the
Safety Cut-Out to reset before you continue to use the
product.

Before you do assembly

WARNING!
• Risk of physical injury!
• Cut injury when the blade turns or the
product starts accidentally.
• Wait for the blade to stop, disconnect the
product from the mains and use gloves
before you do assembly.

To connect the lower handle

2
3
1. Put both lower handles (1) in the product.
Make sure that the handles are fully in place and
the handle hole is inline with the threaded hole.
2. Put both washers (2) on the wing screws (3).
3. Put both wing screws (3) in the threaded holes in the
product.
4. Tighten the wing screws (3).
20

Assembly

To connect the upper handle

1
5
2
3
1. Put the upper handle (4) on the lower handle (1).
2. Push the screws (5) through the holes.
3. Put the washers (2) and the wing nuts (6) on the
screws (5).
4. Tighten the wing nuts (6).
4
2
6
5
5
1
2
Make sure that the handles are fully in place and
the handle holes are inline.
4
2
6
5
1
2
16 - 001 -