Advertisement
Quick Links
Advertisement
Related Manuals for Black & Decker BD126F3
Summary of Contents for Black & Decker BD126F3
- Page 1 AUSTRALIA NEW ZEALAND...
- Page 2 FIG 1 FIG 2 FIG 3 FIG 4 FIG 6 FIG 5...
- Page 3 FIG 7 FIG 8...
-
Page 4: Intended Use
Intended Use for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp Black & Decker drill/screwdriver BD126F3/ edges or moving parts. Damaged or entangled BD146F3 has been designed for screwdriving cords increase the risk of electric shock . - Page 5 does not turn it on and off. Any power tool from one terminal to another. Shorting the that cannot be controlled with the switch is battery terminals together may cause burns or a dangerous and must be repaired. fire. c) Disconnect the plug from the power source e) Under abusive conditions, liquid may be before making any adjustments, changing ejected from the battery;...
- Page 6 Fig. 1 Warning! The battery fluid, a 25-30% solu - 8. Charger tion of potassium hydroxide, can be harmful. 9. Charging indicator In case of skin contact, immediately rinse with Assembly water. Neutralise with a mild acid such as lemon Warning! Before assembly, remove the bat- juice or vinegar.
- Page 7 (2nd gear). - To select forward rotation, push the forward/ Removable Chuck with Quick Connect reverse slider (2) to the left. Change System - Figure 8 (BD126F3/BD146F3 - To select reverse rotation, push the forward/ only) reverse slider to the right.
-
Page 8: Protecting The Environment
place. To insert a screwdriver bit into the Quick proper tool care and regular cleaning. Connect hex shaft, push the bit in until you Your charger does not require any maintenance hear it click into place. To remove the bit, hold apart from regular cleaning. - Page 9 - tery. EC declaration of conformity Australia BD126F3/BD128F3/BD146F3 /BD148F3/BD188F3 Black & Decker (Australia) Pty. Ltd. Black & Decker declares that these products 20 Fletcher Road, conform to: Mooroolbark, Victoria. 3138 EN 50260, EN 55014, EN 60335, EN 61000 Tel.
- Page 10 Drill BD126F3 BD128F3 BD146F3 BD148F3 BD188F3 Voltage Volt dc 14.4 14.4 No load speed 0-380/0-1200 0-380/0-1300 0-350/0-1400 0-350/0-1400 0-450/0-1450 0-5100/0-16900 0-6750/0-21000 0-6750/0-21000 Max. TorqueNm Chuck Capacity mm Max. Drilling capacity Steel Wood Mansory mm Weight (without battery)kg Battery Cat. No...