Pioneer SC-LX801 Basic Manual page 75

> Specifications > Settings
Setting Item Default Value
Surr Back Right 0 dB
Surr Back Left 0 dB
> Listening Modes > Playback Function
Setting Details
After selecting the speaker frequency from between
"63 Hz" and "16 kHz" with the cursors
the volume of that frequency between "−12.0 dB"
and "＋12.0 dB" (in 0.5 dB intervals) with
To readjust the overall volume balance with "Trim",
select "Trim" in / , and use / to adjust the
volume.
• If "OVER!" is displayed during adjustment,
the volume of the frequency band or another
frequency band is too high, so reduce the
volume of the frequency bands until the display
disappears.
• "63 Hz" can only be selected when this speaker
is set to "Large" in "System Setup" - "Speaker" -
"Crossover".
• Depending on the use of the ZONE speakers, it
may not be possible to select this setting.
After selecting the speaker frequency from between
"63 Hz" and "16 kHz" with the cursors
the volume of that frequency between "−12.0 dB"
and "＋12.0 dB" (in 0.5 dB intervals) with
To readjust the overall volume balance with "Trim",
select "Trim" in / , and use / to adjust the
volume.
• If "OVER!" is displayed during adjustment,
the volume of the frequency band or another
frequency band is too high, so reduce the
volume of the frequency bands until the display
disappears.
• "63 Hz" can only be selected when this speaker
is set to "Large" in "System Setup" - "Speaker" -
"Crossover".
• Depending on the use of the ZONE speakers, it
may not be possible to select this setting.
Setting Item Default Value
Surround Left 0 dB
/ , adjust
/ .
Subwoofer 1 0 dB
/ , adjust
/ .
Subwoofer 2 0 dB
> Basic Manual
Troubleshooting | Appendix
Setting Details
After selecting the speaker frequency from between
"63 Hz" and "16 kHz" with the cursors
the volume of that frequency between "−12.0 dB"
and "＋12.0 dB" (in 0.5 dB intervals) with
To readjust the overall volume balance with "Trim",
select "Trim" in / , and use / to adjust the
volume.
• If "OVER!" is displayed during adjustment,
the volume of the frequency band or another
frequency band is too high, so reduce the
volume of the frequency bands until the display
disappears.
• "63 Hz" can only be selected when this speaker
is set to "Large" in "System Setup" - "Speaker" -
"Crossover".
After selecting the speaker frequency from between
"31 Hz" and "250 Hz" with the cursors
the volume of that frequency between "−12.0 dB"
and "＋12.0 dB" (in 0.5 dB intervals) with
To readjust the overall volume balance with "Trim",
select "Trim" in / , and use / to adjust the
volume.
• If "OVER!" is displayed during adjustment,
the volume of the frequency band or another
frequency band is too high, so reduce the
volume of the frequency bands until the display
disappears.
After selecting the speaker frequency from between
"31 Hz" and "250 Hz" with the cursors
the volume of that frequency between "−12.0 dB"
and "＋12.0 dB" (in 0.5 dB intervals) with
To readjust the overall volume balance with "Trim",
select "Trim" in / , and use / to adjust the
volume.
• If "OVER!" is displayed during adjustment,
the volume of the frequency band or another
frequency band is too high, so reduce the
volume of the frequency bands until the display
disappears.
/ , adjust
/ .
/ , adjust
/ .
/ , adjust
/ .
39