Pioneer SC-LX801 Basic Manual page 51

> Specifications > Settings
■ Distance
Set the distance from each speaker to the listening position. Press
controller, and select the MCACC Memory first in "AV Adjust" - "MCACC" - "MCACC
Memory".
Setting Item Default Value
Front Left 10' 0" / 3.00 m
Center 10' 0" / 3.00 m
Front Right 10' 0" / 3.00 m
Height 1 Left 10' 0" / 3.00 m
Height 1 Right 10' 0" / 3.00 m
Height 2 Left 10' 0" / 3.00 m
Height 2 Right 10' 0" / 3.00 m
Surround Right 10' 0" / 3.00 m
Surr Back Right 10' 0" / 3.00 m
Surr Back Left 10' 0" / 3.00 m
> Listening Modes > Playback Function
on the remote
Setting Details
Specify the distance between each speaker and
the listening position.
Specify the distance between each speaker and
the listening position.
Specify the distance between each speaker and
the listening position.
Specify the distance between each speaker and
the listening position.
• Depending on the use of the ZONE speakers, it
may not be possible to select this setting.
Specify the distance between each speaker and
the listening position.
• Depending on the use of the ZONE speakers, it
may not be possible to select this setting.
Specify the distance between each speaker and
the listening position.
• Depending on the use of the ZONE speakers, it
may not be possible to select this setting.
Specify the distance between each speaker and
the listening position.
• Depending on the use of the ZONE speakers, it
may not be possible to select this setting.
Specify the distance between each speaker and
the listening position.
Specify the distance between each speaker and
the listening position.
• Depending on the use of the ZONE speakers, it
may not be possible to select this setting.
Specify the distance between each speaker and
the listening position.
• Depending on the use of the ZONE speakers, it
may not be possible to select this setting.
Setting Item Default Value Setting Details
Surround Left 10' 0" / 3.00 m Specify the distance between each speaker and
the listening position.
Subwoofer 1 10' 0" / 3.00 m Specify the distance between each speaker and
the listening position.
Subwoofer 2 10' 0" / 3.00 m Specify the distance between each speaker and
the listening position.
• Default values vary depending on the regions.
• Distance units can be switched by pressing MODE on the remote controller. When the unit is set as
feet, you can set between 0' 0" 1/2 and 30' 0" in increments of 1/2. When the unit is set as meters,
you can set between 0.01 m and 9.00 m in increments of 0.01 m.
> Basic Manual
Troubleshooting | Appendix
15