Pioneer SC-LX801 Basic Manual page 73

> Specifications > Settings
■ EQ Adjust
You can adjust the output volume of the range of each speaker while listening to test
noises. You can adjust the volume of the different sound ranges for each of the speakers.
You can select up to four bands for the Subwoofer and nine bands for all other speakers.
If the overall volume balance changes by adjusting the volume of each frequency, you can
readjust the balance in "Trim".
Setting Item Default Value
Front Left 0 dB
Center 0 dB
> Listening Modes > Playback Function
Setting Details
After selecting the speaker frequency from between
"63 Hz" and "16 kHz" with the cursors
the volume of that frequency between "−12.0 dB"
and "＋12.0 dB" (in 0.5 dB intervals) with
To readjust the overall volume balance with "Trim",
select "Trim" in / , and use / to adjust the
volume.
• If "OVER!" is displayed during adjustment,
the volume of the frequency band or another
frequency band is too high, so reduce the
volume of the frequency bands until the display
disappears.
• "63 Hz" can only be selected when this speaker
is set to "Large" in "System Setup" - "Speaker" -
"Crossover".
After selecting the speaker frequency from between
"63 Hz" and "16 kHz" with the cursors
the volume of that frequency between "−12.0 dB"
and "＋12.0 dB" (in 0.5 dB intervals) with
To readjust the overall volume balance with "Trim",
select "Trim" in / , and use / to adjust the
volume.
• If "OVER!" is displayed during adjustment,
the volume of the frequency band or another
frequency band is too high, so reduce the
volume of the frequency bands until the display
disappears.
• "63 Hz" can only be selected when this speaker
is set to "Large" in "System Setup" - "Speaker" -
"Crossover".
Setting Item Default Value
Front Right 0 dB
/ , adjust
/ .
Height 1 Left 0 dB
/ , adjust
/ .
> Basic Manual
Troubleshooting | Appendix
Setting Details
After selecting the speaker frequency from between
"63 Hz" and "16 kHz" with the cursors
the volume of that frequency between "−12.0 dB"
and "＋12.0 dB" (in 0.5 dB intervals) with
To readjust the overall volume balance with "Trim",
select "Trim" in / , and use / to adjust the
volume.
• If "OVER!" is displayed during adjustment,
the volume of the frequency band or another
frequency band is too high, so reduce the
volume of the frequency bands until the display
disappears.
• "63 Hz" can only be selected when this speaker
is set to "Large" in "System Setup" - "Speaker" -
"Crossover".
After selecting the speaker frequency from between
"63 Hz" and "16 kHz" with the cursors
the volume of that frequency between "−12.0 dB"
and "＋12.0 dB" (in 0.5 dB intervals) with
To readjust the overall volume balance with "Trim",
select "Trim" in / , and use / to adjust the
volume.
• If "OVER!" is displayed during adjustment,
the volume of the frequency band or another
frequency band is too high, so reduce the
volume of the frequency bands until the display
disappears.
• "63 Hz" can only be selected when this speaker
is set to "Large" in "System Setup" - "Speaker" -
"Crossover".
• Depending on the use of the ZONE speakers, it
may not be possible to select this setting.
/ , adjust
/ .
/ , adjust
/ .
37