Pioneer SC-LX801 Basic Manual page 56

> Specifications > Settings
Hardware
Make settings related to the HDMI CEC, HDMI Standby Through, or ARC features, settings
related to power management of the unit, such as Auto Standby and Network Standby, and
output settings for the 12V Trigger jack.
■ HDMI
Setting Item Default Value
HDMI CEC Off
20
> Listening Modes > Playback Function
Setting Details
Setting to "On" enables the input selection link and
other link functions with HDMI connected CEC
compliant device.
"On": Use this function
"Off": Do not use this function
When changing this setting, turn off and then on
again the power of all connected components.
• Depending on the TV set, a link may need to be
configured on the TV.
• This function is effective only when the device is
connected to the HDMI OUT MAIN terminal.
• Setting to "On" and closing the on-screen menu
displays the name of the CEC-compatible
components and "CEC On" on the display.
• Power consumption in standby mode may
increase if "On" is set. (Depending on the TV
status, the unit will enter the normal standby
mode.)
• If you operate the MASTER VOLUME dial on
the main unit when this setting is "On" and
audio is output from the TV speakers, audio will
be output also from the speakers connected to
the unit. If you want to output from only either of
them, change the unit or TV settings, or reduce
the volume of the unit.
• If abnormal operation occurs when you set the
setting to "On", set it to "Off".
• When connecting a non-CEC compatible
component, or when you are not sure whether it
is compatible, set the setting to "Off".
Setting Item Default Value Setting Details
HDMI Standby Off When this is set to anything other than "Off",
Through you can play the video and audio of an HDMI
connected player on the TV even if the unit is in
standby mode. Only "Auto" and "Auto(Eco)" can be
selected if "HDMI CEC" is set to "On". If you select
anything else, set "HDMI CEC" to "Off".
"BD/DVD", "CBL/SAT", "GAME", "STRM BOX",
"HDMI 5", "HDMI 6", "HDMI 7", "AUX": For
example, if you select "BD/DVD", you can play the
equipment connected to the "BD/DVD" jack on the
TV even if the unit is in standby mode. Select this
setting if you have decided which player to use with
this function.
"Last": You can play the video and audio of the
input selected immediately prior to the unit being
switched to standby on the TV.
"Auto", "Auto (Eco)": Select one of these settings
when you have connected equipment that
conforms to the CEC standard. You can play the
video and audio of the input selected on the TV,
irrespective of what input was selected immediately
prior to the unit being switched to standby, using
the CEC link function.
> Basic Manual
Troubleshooting | Appendix
• Power consumption in standby mode increases
if set to anything other than "Off".
• To play players on the TV that do not conform to
the CEC standard, you will need to turn the unit
on and switch to the relevant input.
• When using TV that complies with the
CEC standard, you can reduce the power
consumption in standby mode by selecting
"Auto (Eco)".