Advertisement
ENGINE STOP SWITCH CORD
This model has an engine stop switch cord (lan-
yard) designed for use by an adult supervising
the child operating the ATV. When using the
engine stop switch cord, be sure the speed lim-
iter on the handlebar is adjusted to limit the ATV
to a walking speed. (See page 4-13.)
1. Push the clip on the end of the engine stop
switch cord under the engine shut-off
switch (black button).
2. Put your fingers in the loop at the other
end of the cord.
3. As your child is riding, walk behind the
ATV, closely watching his or her actions as
well as the path ahead.
4. If there is a potential hazard ahead or if
your child is not riding correctly, pull firmly
on the cord (lanyard) to stop the engine.
Because the ATV will continue to roll for
some distance, allow extra time and dis-
tance to pull the cord before a potentially
hazardous situation might be encountered.
2-23
Advertisement
Chapters
Troubleshooting
