Saving Scanned Data On The Usb Flash Drive Using The Operation Panel Of The Machine - Canon MX520 series Online Manual

Saving Scanned Data on the USB Flash Drive Using the
Operation Panel of the Machine
You can save scanned data on the USB flash drive using the operation panel of the machine.
Important
Do not remove the USB flash drive from the machine under the following conditions:
While scanning is in progress
Before saving the scanned data
For safety reasons, we recommend backing up the scanned data saved on a USB flash drive to
another media periodically to avoid unexpected accidents.
We assume no responsibility for damage to or loss of data for whatever reason even within the
warranty period.
1. Make sure that the machine is turned on.
Confirming that the Power Is On
2. Insert the USB flash drive into the USB flash drive port.
Inserting the USB Flash Drive
3. Press the SCAN button.
The screen for selecting to which you save the data is displayed.
Note
If the Scan standby screen for forwarding the data to the USB-connected computer is displayed
on the LCD, press the left Function button to display the screen for selecting to which you save
the data.
4. Select USB flash drive, then press the OK button.
5. Select Save to USB flash drive, then press the OK button.
The Scan standby screen is displayed.