Saving Scanned Data On The Usb Flash Drive Using The Operation Panel Of The Machine - Canon MX450 series Online Manual

Saving Scanned Data on the USB Flash Drive Using the
Operation Panel of the Machine
You can save scanned data on the USB flash drive using the operation panel of the machine.
Important
Do not remove the USB flash drive from the machine under the following conditions:
While scanning is in progress
Before saving the scanned data
For safety reasons, we recommend backing up the scanned data saved on a USB flash drive to
another media periodically to avoid unexpected accidents.
We assume no responsibility for damage to or loss of data for whatever reason even within the
warranty period.
1. Make sure that the machine is turned on.
Confirming that the Power Is On
2. Insert the USB flash drive into the USB flash drive port.
Inserting the USB Flash Drive
3. Press the SCAN button.
The Scan menu screen is displayed.
Note
If the Scan standby screen for forwarding the data to the USB-connected computer is displayed
on the LCD, press the Menu button to display the Scan menu screen.
4. Use the button to select Save to, then press the OK button.
5. Use the button to select USB flash drive, then press the OK button.
6. Specify the scan settings.
Specify each scan setting in order.
Note
For details on each setting item:
Setting Items on the Operation Panel of the Machine
1. Make sure that Scan size is selected, then press the OK button.
2. Use the
3. Make sure that Data format is selected, then press the OK button.
4. Use the
5. Make sure that Scan resolution is selected, then press the OK button.
6. Use the
The Scan standby screen is displayed after all the settings have been specified.
Note
button to select the scan size, then press the OK button.
button to select the data format, then press the OK button.
button to select the scan resolution, then press the OK button.