Checking Chain Tension; Chain Lubrication Test; Cutting Instructions - Echo CS-355T Operator's Manual

OPERATION
Note: If engine does not stop, move the control lever to the Cold
Start position to apply full choke to stop engine. Return
the unit to your authorized dealer to check and repair
ignition switch before starting the engine again.

Checking Chain Tension

Do not operate with a loose chain. Serious injury can occur.
Chain tension should be checked
frequently during work and
corrected as necessary.

Chain Lubrication Test

Hold the chain just above a dry
surface and open the throttle to half
speed for 30 seconds.
A thin line of "thrown" oil should be
seen on the dry surface.

Cutting Instructions

General
This chain saw is designed for cutting wood. Do not cut
◆
metal, plastic or any non-wood material.
Wear suitable hearing
◆
protection such as
earmuffs or earplugs to
protect against
objectionable or
uncomfortable loud
noises.
34
CS-355T
X7503323507
© 01/2021 ECHO Incorporated