Specifications - Echo CS-355T Operator's Manual

CS-355T
• Drain fuel tank completely. Press purge bulb 6-7 times to remove
remaining fuel from carburetor then drain the tank again. Close choke,
start and run the engine until it stops due to lack of fuel.
• Allow engine to cool. Remove the spark plug lead from the spark plug.
Remove the spark plug. Pour 7 cc (0.25 oz.) of fresh, clean, two-stroke
engine oil into the cylinder through the spark plug hole.
• Store in a dry area, free from dust.
Do not store in an enclosure where fuel fumes may accumulate
or reach an open flame or spark.
Do not lend or rent your chain saw without the Operator's
Manual.
Note:
• For future reference, you should keep this Operator's Manual.
• If this Operator's Manual becomes illegible or is lost, please contact
your dealer, or go to www.echo-usa.com.

SPECIFICATIONS

Model
Length
Width
Height
Dry weight
Engine
Displacement
Bore
Stroke
Compressions ratio
Carburetor
Spark plug
Fuel tank capacity
Fuel / Oil Ratio
Gasoline
X7503323507
© 01/2021 ECHO Incorporated
CS-355T
220 mm (8.7 in.)
244mm (9.6 in)
220 mm (8.7 in.)
3.5 kg (7.7 lb.) Without chain and guide bar
Air-cooled two-stroke single cylinder
35.8 ml (2.18 in.
3
)
39.0 mm (1.54 in.)
3.0 mm (1.18 in.)
7.1:1
Diaphragm type
NGK BPMR8Y (Gap 0.65 mm [0.026 in.])
330 mL (11.1 US. fl. oz.)
50:1
Use 89 octane unleaded. Do not use fuel containing methyl
alcohol, more than 10% ethyl alcohol or 15% MTBE. Do not
use alternative fuels such as E-15 or E-85.
SPECIFICATIONS
55