Kick Guard Tm; Guide Bar; Saw Chain - Echo CS-355T Operator's Manual

OPERATION
Chain and guide bar gauge size must be identical. Use Bar/Chain
combinations shown in table above.
TM
Kick Guard
(Optional)
To purchase an optional Kick Guard
the dealer nearest you, For ECHO, Call: 1-800-432-ECHO (3246) or on the
web at www.echo-usa.com. For Shindaiwa, Call: 1-877-986-7783 or on the
web at www.shindaiwa-usa.com.

Guide Bar

(Low-kickback)
Replacement guide bars.
The following guide bars may be considered to have equivalent kickback
energy.
• Sprocket nose guide bars of the same length and nose radius, same pitch
and having the same number of teeth.
• Hard nose guide bars of the same length and nose radius as a sprocket
nose bar.

Saw Chain

(Low-kickback)
Only use saw chain designated as, "LOW-KICKBACK," that
meets ANSI B175.1 or CSA Z62.1.3. Standard when tested on the
representative sample of chain saws below 3.8 C.I.D., and guide
bar specified.
40
TM
contact your dealer. For the name of
© 01/2021 ECHO Incorporated
CS-355T
X7503323507