Starting Warm Engine - Echo CS-355T Operator's Manual

CS-355T
7. Return the control lever (A) to
"Warm Start" position as soon
as engine starts to fire, when
first firing sound is heard.
8. Pull starter handle to start the
engine.
Note: If engine does not start
after 5 pulls, repeat
instructions.
9. When engine starts,
immediately squeeze and
release throttle trigger (B) to
disengage throttle latch and
return engine to idle. Pull front
hand guard (C) towards the
operator immediately (chain
brake unlocked position).

Starting Warm Engine

Make sure the bar and chain are free from any obstruction when
starting the chain saw.
1. Move chain brake lever fully
FORWARD to LOCK chain
brake before starting.
2. Confirm there is fuel and chain
oil in the tanks.
X7503323507
© 01/2021 ECHO Incorporated
OPERATION
A
c
B
31