CS-2511TN
Note:
If engine does not stop, rotate choke control knob counterclockwise,
to full choke, to stop engine. Return the unit to your authorized
dealer to check and repair Stop switch before starting the engine
.
again
Checking Chain Tension
Do not operate with a loose chain. Serious injury can occur.
Chain tension should be checked
frequently during work and
corrected as necessary.
Chain Lubrication Test
Hold the chain just above a dry
surface and open the throttle to half
speed for 30 seconds.
A thin line of "thrown" oil should be
seen on the dry surface.
Cutting Instructions
General
This chainsaw is designed for cutting wood. Do not cut
◆
metal, plastic or any non-wood material.
Wear suitable hearing
◆
protection such as
earmuffs or earplugs to
protect against
X7503334400
© 11/22 ECHO Incorporated
OPERATION
37