Operation; Storage - Gardena EasyCut Li-18/50 Operating Instructions Manual

5. Operation

Working positions :
a
1
b
b
Starting the Hedge Trimmer :
B 1
C
A
0

6. Storage

Storage :
A
0
The hedge trimmer can be operated in 3 working positions.
Side trimming:
v Take guide handle
b
at the side .
DANGER ! Risk of physical injury !
If the Hedge Trimmer does not switch off auto-
A
matically, there is a risk of lacerations.
V Never override the safety devices (e.g. by
strapping down one of the start buttons).
Switching the Hedge Trimmer on :
The hedge trimmer is fitted with a two-handed safety device (2 start
buttons) to prevent the unit from being turned on by accident.
D
1. Push the battery onto the handle (see 4. Initial Operation).
2. Remove the protective cover
3. Hold the guide handle
B
button .
4. Hold the main handle
start button
The hedge trimmer will start.
Switching the Hedge Trimmer off :
1. Release the two start buttons
2. Remove the battery from the handle (see 4. Initial Operation).
3. Slide the protective cover
The hedge trimmer must be stored out of the reach of children.
1. Remove the battery and charge (see 4. Initial Operation).
2. Clean the hedge trimmer (see 7. Maintenance) and slide the
protective cover
3. Store the hedge trimmer in a dry, frost free place.
High trimming :
1
v Take guide handle
a
at the top .
0
from the cutter blade
1
with one hand and press the start
D
with the other hand and press the
C
.
B C
/
0
over the cutter blade
0
over the cutter blade
Low trimming :
1
v Take guide handle
a
at the top .
A
.
A
.
A
.
1
17