Service / Warranty - Gardena EasyCut Li-18/50 Operating Instructions Manual

Noise emission value L
Uncertainty K
WA
Hand / arm vibration a
Uncertainty K
a
Battery
Battery capacity
Battery charging time
Idling time
Battery charger
Mains voltage
Maximum output current
Output voltage
Measuring process complying with 1) EN 60745-2-15 2) EU-directive 2000 / 14 / EC. The stated vibration emission value has been
measured according to a standardised test procedure and can be used for comparison of one electric power tool with another. It can
also be used for preliminary evaluation of exposure. The vibration emission value can vary during actual use of the electric power tool.

11. Service / Warranty

20
EasyCut Li-18 / 50 (Art. 8877)
measured 88 dB (A) / guaranteed 89 dB (A)
WA 2)
1 dB (A)
< 2,5 m / s 2
vhw 1)
1,5 dB (A)
lithium ion (18 V)
2.0 Ah
approx. 3 hrs 80 % / approx. 5 hrs. 100 %
approx. 75 mins (with full battery)
230 V / 50 - 60 Hz
600 mA
18 V (DC)
GARDENA guarantees this product for 2 years (from date of
purchase). This guarantee covers all serious defects of the unit
that can be proved to be material or manufacturing faults. Under
warranty we will either replace the unit or repair it free of charge
if the following conditions apply :
• The unit must have been handled properly and in keeping
with the requirements of the operating instructions.
• Neither the purchaser nor a non-authorised third party have
attempted to repair the unit.
The blade and eccentric drive are wearing parts and are not
covered by the guarantee.
This manufacturer's guarantee does not affect the user's existing
warranty claims against the dealer / seller.
If a fault occurs with your hedge trimmer, please return the
faulty unit together with the receipt and a description of the
fault, with postage paid to the address of the Service Centre
at the back of these operating instructions.