BT Fax User Manual page 50

Check that the telephone line cord is properly
connected.
Monitor volume may be set to Low. Move the monitor
switch to Medium or High. See 'At a glance', page 3.
Check that your PaperJet 300 is not already sending
or receiving a fax.
Press
. Then try printing again.
Press to turn of the light. Print an activity
report, page 39 and check the error code shown,
see page 49.
48
until the display shows
Pages may be sticking together. Remove and fan out
the paper before inserting again.
Check that there are not too many sheets in the paper
tray. Remove some sheets if necessary.
If the paper tray contains different types of paper, try
loading just one type.
Make sure the paper is held straight in the paper tray
by the paper guide.
If you find that the ink smudges easily, there may be
a compatibility problem between the ink and the
paper you are using. It is recommended that you try
using a different brand of paper.
If this doesn't resolve the problem, try changing the
INK SET setting to setting B (47 in the SETTINGS
menu). Note that the ink setting will affect copies
and faxes only (not PC prints).
If you cannot solve the problem or need further
advice, call the PaperJet Customer Helpline
.