After Connecting; Before First Use - Bauknecht ECTM 8245 Instructions For Use Manual

Table of Contents

Advertisement

AFTER CONNECTING

T
HE OVEN CAN BE OPERATED ONLY
firmly closed.
T
HE EARTHING OF THIS APPLIANCE
manufacturer will accept no responsibility for
injury to persons, animals or damage to ob-
jects arising from the non-observance of this
requirement.
O
, remove the accessories
PEN THE DOOR
and ensure the oven is empty
R
INSE THE WATER CONTAINER
ter (no detergents) and then fill it to the
"MAX" mark.
S
LIDE THE WATER CONTAINER
until it engages the contact point and sits
firmly in place.
R
C
UN THE
ALIBRATION FUNCTION
screen instructions.
N
OTE
T
responsible for filling and
HE WATERPUMP
draining the steam boiler is now activat-
ed. It will initially sound louder during air-
pumping and lower when water is filling
the pump again.
T
and no concern for alarm.
HIS IS NORMAL
IMPORTANT INFORMATION
if the oven door is
T
HE FIRST TIME THE OVEN IS SWITCHED ON
asked to set the language and current time.
is compulsory. The
Follow the instructions under the headline
"Changing settings" in this instructions for use.
The appliance is ready to use after these two
steps have been taken.
The manufacturers are not liable for any
problems caused by the user's failure to ob-
serve these instructions.

BEFORE FIRST USE

with tap wa-
into it's socket
and follow on
A
, let the oven cool to
FTER CALIBRATION
room temperature and then wipe dry any
damp areas if present.
E
and dry it off be-
MPTY THE WATER CONTAINER
fore further use.
R
F
A
UN THE
ORCED
IR FUNCTION
about an hour to eliminate the smell and
fumes of the protective grease and insu-
lating materials. The window should be
kept open during this operation.
, you will be
at 200°C for
7

Advertisement

Table of Contents
loading

Table of Contents