Safeguarding The Environment; Declaration Of Conformity; Troubleshooting Guide; After Sales Service - Bauknecht EMCE 7166 User And Maintenance Manual

Hide thumbs Also See for EMCE 7166:
Table of Contents

Advertisement

Available languages

Available languages

SAFEGUARDING THE ENVIRONMENT

Disposal of packaging materials
The packing material is 100% recyclable and is marked with the recycle symbol ( ). The various parts of
the packing must therefore be disposed of responsibly and in full compliance with local authority
regulations governing waste disposal.
Scrapping the product
-
This appliance is marked in compliance with European Directive 2002/96/EC, Waste Electrical and
Electronic Equipment (WEEE).
-
By ensuring this product is disposed of correctly, you will help prevent potential negative
consequences for the environment and human health, which could otherwise be caused by
inappropriate waste handling of this product.
-
The symbol
on the product or on the accompanying documentation indicates that it should not be
treated as domestic waste but must be taken to an appropriate collection centre for the recycling of
electrical and electronic equipment.
Energy saving
-
Only pre-heat the oven if specified in the cooking table or your recipe.
-
Use dark lacquered or enamelled baking moulds as they absorb heat far better.
-
Switch the oven off 10/15 minutes before the set cooking time. Food requiring prolonged cooking will
continue to cook even once the oven is switched off.

DECLARATION OF CONFORMITY

-
This oven, which is intended to come into contact with foodstuffs, complies with European
Regulation (
) n. 1935/2004 and has been designed, manufactured and sold in conformity with the
safety requirements of the "Low Voltage" directive 2006/95/CE (which replaces 73/23/CEE and
subsequent amendments), the protection requirements of "EMC" 2004/108/CE.

TROUBLESHOOTING GUIDE

Oven not working:
Check for the presence of mains electrical power and if the oven is connected to the electrical supply.
Turn off the oven and restart it to see if the fault persists.
The electronic programmer does not work:
If the display shows the letter " " followed by a number, contact your nearest After-sales Service.
Specify in this case the number after the letter " ".
AFTER-SALES SERVICE
Before calling the After-Sales Service:
1.
See if you can solve the problem yourself with the help of the suggestions given in the
"Troubleshooting guide".
2.
Switch the appliance off and then on again it to see if the problem has been eliminated.
If the fault persists after the above checks, contact the nearest After-sales Service.
Always specify:
a brief description of the fault;
the type and exact model of the oven;
the service number (number after the word Service on the rating plate), located on the right hand edge of the
oven cavity (visible when the oven door is open). The service number is also indicated on the guarantee booklet;
your full address;
your telephone number.
If any repairs are required, contact an authorised After-sales Technical Service (to guarantee the use of
original spare parts and correct repair).
GB28

Advertisement

Table of Contents
loading

Table of Contents