Slave Mode; Service Modes; Color Options; Setting Dmx Addresses - Beamz MHL 108 WASH 150.509 Instruction Manual

4- Slave Mode

Up-to 32 units can be daisy chained together with one single unit acting as Master and all other linked
units as Slaves. Slave units will all run in synch with the master unit without the need for an additional
controller. Connections can be made using standard DMX control cables with Master unit running in Auto
Run or Sound Activated Modes an placed at the start of the chain
Choosing Slave Mode:
To select, use the "MODE/ESC" button and choose "AUDI". When the "ENTER" button is pressed the
LED display changes to "Son" and the unit will be slaved to control signals coming from a Master unit

5- Service Modes

After major configuration changes it may be necessary to reboot or reset the unit.
Resetting the Unit:
To select, use the "MODE/ESC" button and choose "rEST"(restore). Press "ENTER" to confirm. The unit
powers itself down and then on again for a few seconds. During this time the LED display will scroll "rEST"
from left to right, after which normal operation recommences.
Restoring factory defaults
To select, use the "MODE/ESC" button and choose "LoAD"(load). Press "ENTER" to confirm.
The LED display will change to "d001" to confirm a factory reset has been completed
Powering the unit initially:
During the warm up the unit will auto test itself for a few seconds. During this time the led display will scroll
"rEST" from left to right .The unit then commences operation normally
6- DMX Modes
The unit supports 5 and 12 channel DMX Sub-modes frim a standard desk. When a suitable DMX
connection is made, the "decimal point" in "d.001" will flash.

Setting DMX Addresses:

Use the "MODE/ESC" button to display "d001", "UP" and "DOWN" buttons allows individual DMX
addresses to be set from "d001" to "d512"
Choosing between DMX Sub-modes:
The LED display shows the chosen control mode when the "MODE" button is pressed. Use "UP" and
"DOWN" buttons to choose the appropriated DMX control Mode
LED Display
5CH
13CH

Color Options

The Unit offers a range of 16 preset colors. These can be individually selected with DMX control and
feature in Auto Run Sound Active modes.
DMX Sub-mode
5Channel
13channel
Color Preset
White
Red
Dark Green
Dark Blue
Light Blue
Magenta
Yellow
Purple
Orange
Light Green
Pink
Brown
Gold
Crimson
Violet
Dark Purple
- 8 -