Beamz MHL 108 WASH 150.509 Instruction Manual page 2

Congratulations to the purchase of this Beamz LED Moving Head. Please read this manual
thoroughly prior to using the unit in order to benefit fully from all features.
Read the manual prior to using the unit. Follow the instructions in order not to invalidate the
warranty. Take all precautions to avoid fire and/or electrical shock. Repairs must only be
carried out by a qualified technician in order to avoid electrical shock. Keep the manual
for future reference.
Keep the original packing material so that you can transport the unit in safe conditions.
- Prior to using the unit, please ask advice from a specialist. When the unit is switched on for the
first time, some smell may occur. This is normal and will disappear after a while.
- The unit contains voltage carrying parts. Therefore do NOT open the housing.
- Do not place metal objects or pour liquids into the moving head. This may cause electrical
shock and malfunction.
- Do not place the unit near heat sources such as radiators, etc. Do not place the unit on a
vibrating surface. Do not cover the ventilation holes.
- The unit is not suitable for continuous use.
- Be careful with the mains lead and do not damage it. A faulty or damaged mains lead can
cause electrical shock and malfunction.
- When unplugging the unit from a mains outlet, always pull the plug, never the lead.
- To avoid fire and shock hazard, do not expose the unit to rain and moisture.
- Do not plug or unplug the unit with wet hands.
- If the plug and/or the mains lead are damaged, they need to be replaced by a qualified
technician.
- If the unit is damaged to such an extent that internal parts are visible, do NOT plug the unit into
a mains outlet and DO NOT switch the unit on. Contact your dealer. Do NOT connect the unit to
a rheostat or dimmer.
- All repairs should be carried out by a qualified technician only.
- Connect the unit to an earthed mains outlet (220-240Vac/50Hz) protected by a 10-16A fuse.
- During a thunderstorm or if the unit will not be used for a longer period of time, unplug it from
the mains. The rule is: Unplug it from the mains when not in use.
- If the unit has not been used for a longer period of time, condensation may occur. Let the unit
reach room temperature before you switch it on. Never use the unit in humid rooms or
outdoors.
- During operation, the housing becomes very hot. Do not touch it during operation and
immediately after.
- To prevent accidents in companies, you must follow the applicable guide lines and follow the
instructions/warnings.
- Secure the unit with an extra safety chain if the unit is ceiling mount. Use a truss system with
clamps. Make sure nobody stands in the mounting area. Mount the moving head at least 50cm
away from inflammable material and leave at least 1 meter space on every side to ensure
sufficient cooling.
- This unit contains high intensity LEDs. Do not look into the LED light to prevent damage to your
eyes.
- Do not switch the unit on when no LED (tube/lamp) is fitted. Do not repeatedly switch the fixture
on and off. This shortens the life time.
- Keep the unit out of the reach of children. Do not leave the unit unattended.
- Do not use cleaning sprays to clean the switches. The residues of these sprays cause deposits
of dust and grease. In case of malfunction, always seek advice from a specialist.
- Only operate the unit with clean hands.
ENGLISH
- 1 -